Price : $30.09
You Save : $9.90 (25%)
Item Description
Amazon.com Item Description
The Kidde PI2010 Battery-Operated Dual Sensor Smoke Alarm combines photoelectric and ionization sensing technologies into 1 unit to present broad detection against smoldering and flaming fires. Experts suggest that for optimal protection you have both kinds of sensing engineering in your dwelling. This smoke alarm's trademarked Hush feature permits you to silence nuisance alarms, whilst an indicator LED and test feature let you conveniently confirm that the alarm is working.
The Kidde PI2010 Smoke Alarm:
- Employs both photoelectric and ionization sensors.
- Capabilities a hush button to silence the alarm for non-emergency scenarios like a smoky dinner.
- Compact style blends in seamlessly with your property decor.
- Wire-in smoke alarm with 9V battery backup.
With two numerous sensors, you will get warnings sooner no matter the kind of fire. .
Be assured of your home's security with the PI2010 smoke alarm. .Dual-Sensor Technologies for Enhanced SafetyExperts divide dwelling fires into two groups: flaming and smoldering. Flaming fires result from flammable liquids and cooking accidents, when smoldering fires most regularly occur when smoking supplies, such as cigarettes, are left unattended. Ionization smoke sensors might possibly detect smaller, less visible fire particles, like those produced by flaming fires, sooner than photoelectric sensors. However, photoelectric sensors are may perhaps detect bigger, far more visible fire particles, such as those made by smoldering fires, sooner than ionization sensors. Every single need to pass identical efficiency standards to get third-party approval and meet Underwriters Laboratories (UL) 217, the independent normal to which alarms are listed. Simply because you don't know what kind of fire you will have in your home, professionals advocate installing both types of technologies for optimal protection.
Authorities Suggest Protection from Both Forms of FiresVirtually every single recognized fire authority recommends the installation of both ionization and photoelectric alarms in order to maximize protection from either flaming or smoldering fires. Kidde provides photoelectric smoke alarms, ionization smoke alarms, and dual sensor alarms, which mix each technologies in 1 unit. Regardless of the technology, the most necessary issue is to assure that you have operating smoke alarms on each and every floor of your dwelling, inside every single bedroom and outside sleeping locations. Studies show putting alarms in both bedrooms and hallways could increase a family's escape time by up to 15 minutes.
Fire Authorities recommending both smoke alarm technologies:
Trademarked Hush Function for ConvenienceBy pressing the Hush button, you can very easily and safely silence nuisance alarms brought on by non-emergency scenarios, such as overcooked dinners.
This function desensitizes the alarm for around seven minutes. Throughout this time, the alarm chirps each and every 30 to 40 seconds. If the smoke is also dense, the Hush function is overridden and the alarm nevertheless sounds, and the alarm automatically resets at the end of the seven minutes. This hassle-free safety measure eliminates the temptation to remove the alarm's battery, which creates an unsafe scenario.
Wire-in Smoke Alarm with Reliable 9-Volt Battery Backup, Indicator LED, and Test FeatureBecause a smoke alarm only aids guard you if it really is working, this unit attributes a red LED that flashes just about every 30 to 40 seconds to indicate that it is operating appropriately. For additional peace of thoughts, the alarm contains a test/reset button that enables you to periodically test its circuitry and horn.
The PI2010 is a wire-in smoke alarm with 9V battery backup, which supplies continuous protection against smoke and fire hazards even in the course of power outages. The unit provides a low battery warning that difficulties a brief chirp every 30 to 40 seconds for at least seven days just before losing power, letting you know it really is time to modify the battery.
The unit measures just five.75 inches in diameter and 1.eight inches deep, and it features a neutral, white finish. It characteristics tamper resist features to deter vandalism or theft.
This dual-sensor smoke alarm is UL listed, so you can be confident of its top quality, and it is backed by a ten-year limited warranty.
About Kidde: A UTC Fire Security BrandRenowned for worldwide leadership in fire detection and suppression, Kidde gives options ranging from transportable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems.
Kidde is a UTC Fire Safety brand, with a history that's wealthy with innovations, from the patent of the Chubb Detector Lock in 1818 to the improvement of the world's very first wireless networked smoke detectors in 2004.
What is in the BoxDual Sensor photoelectric/ionization smoke alarm with mounting bracket and mounting hardware, 9-volt battery, ten-year restricted warranty, and bilingual user's manual.
The Kidde PI2010 is a breeze to operate and has a hush function to temporarily silence alarms.
From the Manufacturer
The Kidde PI2010 is a 120VAC, wire-in smoke alarm with 9V battery backup. This smoke alarm functions as a stand alone unit or in an interconnected technique. The Kidde PI2010 features hush, permitting you to promptly silence nuisance alarms and also contains a tamper resist capabilities that deters tampering and theft. The PI2010 includes a fast connect power harness that will allow for quick and uncomplicated installation. This smoke alarm combines each photoelectric and ionization sensors. Ionization sensing alarms may detect invisible fire particles (related with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms could possibly detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that each ionization and photoelectric smoke alarms be installed to aid insure maximum detection of the a number of sorts of fire that can happen within the residence. The Kidde PI2010, 120VAC, wire-in smoke alarm with 9V battery backup offers continuous protection against smoke and fire hazards, even during power outages. The mixture of ionization and photoelectric sensors offer the very best protection against each quickly flaming and slow smoldering fires. The Kidde PI2010 interconnects with up to 24 Kidde devices of which 18 can be initiating. This unit also includes flashing LEDs to signal the alarm is functioning adequately, a low battery warning and a loud 85dB alarm. The Kidde PI2010 is UL Listed and contains a ten year restricted battery.
Customer Reviews
I did not know about replacing smoke alarms each and every decade until very recently. The units in my dwelling were two decades old, hardwired AC with no battery backup. They tested fine but just after twenty years it is surely time to replace them by any typical. There are 3 in my home, one particular on every single floor.
Immediately after carrying out a bit of analysis and being a intelligent consumer, I decided the PI2010 was the best selection out there. I purchased them up at a neighborhood large box property center for the reason that the price was extremely competitive with Amazon and I did not have to wait for shipping (even absolutely free super saver shipping).
In the box was a mounting bracket, three-wire harness, instructions, screws, and the smoke alarm.
Installation was a breeze - shut off the power at the circuit breaker initial, removed the old alarms and harnesses next. The instructions with the PI2010 created it clear to not pull out the battery shipping tab until the units all had AC power applied. The mounting bracket was able to use the existing screws so I did not have to even remove them from the ceiling box. The harness wired up conveniently and just after plugging it into the alarm it only took a smaller twist to secure it to the mounting mounting bracket. Soon after turning the power back on, I pulled the battery tabs out of every alarm. I tested every single a single, and had a buddy make certain the units on the other floors sounded also.
The alarms in this model are about twice as loud as my old smoke alarms, practically ear splitting loud so I believe there's no chance to sleep by way of it. A green LED tells you it has AC power and there is a red LED that flashes every single so typically to say it's working. I may perhaps get the 'hush' function useful for my occasional kitchen disaster, but fanning a cookie sheet is my usual move when I burn anything also crispy.
The reality that the battery compartment is on the backside does not detract from the alarm. just a very simple quarter twist and the unit comes off the bracket. On that note, it does have an anti-tamper feature that if you pick to activate, removing it from the bracket needs a read by way of the instructions and a lot significantly more work.
All in all, it was a breeze to install, it looks and feels pro, it is the loudest alarm I've ever heard, and the hush feature is fantastic.
I plan on extending the wiring and installing these in every of the bedrooms, above and beyond minimum code.
Just purchased a house and the smoke detector was more than 20 years old. Right after looking at the varied smoke detectors on the internet, realized that I required a dual alarm with each photoelectric and ionization sensors for perfect coverage. Most of the less costly alarms are only ionization. This unit met my desires perfectly...
Dual sensor
Tricky Wired (preceding detector was tricky wired)
Battery Backup
Hush button (for false alarms)
Got the alarm a couple of days just before the estimated arrival date. Pulled the pieces out of the box (directions, bracket, unit, and wiring harness), did a swift look by means of the directions and went to perform. It truly only took me about fifteen minutes to install...most of that time taking the old units bracket down and placing up the new 1. The wiring harness has three wires...black, white and red...but the red a single has a plastic cover over the end in case you don't need to wire many alarms together.
After attaching the necessary wires to the property electric with wirenuts and electrical tape, just attach the bracket to the wall, make the sure the included battery is isntalled in the unit, plug the wiring harness into the back of the unit and attach to bracket. Piece o' cake.
If your property currently has a specific wiring harness, and you do not want to mess with electrical, I believe there are adaptors offered for the back of this unit as nicely that can accept other shaped harnesses. Fairly hassle-free, if you want them. For me, it was pretty effortless to cut the power and hook it up myself.
Related Product
No comments:
Post a Comment