Friday, March 23, 2012

Chamberlain CWPIR Wireless Motion Alert Add-on Sensor

Chamberlain CWPIR Wireless Motion Alert Add-on Sensor
Price : $29.99
List Price : $49.99
You Save : $20.00 (40%)

Product Description


From the Manufacturer
Wireless Motion Alert Add-on Sensor
Expand your Wireless Alert System with additional transmitters (use up to four with one receiver). Receiver distinguishes every transmitter with a different tone, so you know which area has somebody slinking about your property. For use with Item 333182. U.S.A. Application: Add-on sensor for 333182, Detections Motion (ft.): 15-30
Chamberlain CWPIR Wireless Motion Alert Add-on Sensor

First Alert SC9120B Hardwire Combination Smoke/Carbon Monoxide Alarm with

First Alert SC9120B Hardwire Combination Smoke/Carbon Monoxide Alarm with Battery Backup
Price : $35.35
You Save : $57.64 (62%)

Item Description


Amazon.com Product Description
The BRK hardwire combination smoke and carbon monoxide alarm detects two hazards with a single basic unit. Carbon monoxide (CO) is a colorless, odorless, deadly gas. It can be emitted by sources which includes gas or oil furnaces, gas clothes dryers, water heaters, fireplaces, wood stoves, charcoal grills, gas ranges, and space heaters. A clogged chimney, improper venting, and attached garages can also result in carbon monoxide accumulation. According to the Consumer Product Safety Commission (CPSC), at least one particular CO alarm should be installed close to a home's sleeping area.
The BRK SC9120 hardwire combination smoke and CO alarm with battery backup includes these characteristics:
  • Rapid plug-in power connector for simple installation.
  • 120-volt AC inter-connectable (with maximum 18 compatible devices). The alarm can be interconnected with up to 12 other compatible smoke alarms and six compatible devices like bells, horns, repeaters and door closers. If one unit triggers an alarm, all smoke alarms in the series will sound. Power indicators show which unit in the series initiated the alarm.
  • Ionization sensor which is far more effective at detecting flaming fires which consume combustible supplies rapidly and spread immediately.
  • Microprocessor controlled for fewer nuisance alarms.
  • Single test/silence button which both silences a non-threatening alarm or low battery warning and makes it possible for you to test the unit's functionality.
  • Automatically performs internal test of functionality.
  • Latching alarm indicator which automatically identifies which unit initiated the alarm.
  • Separate smoke and carbon monoxide visual and audible warnings.
  • Battery drawer lock and mounting bracket lock for tamper resistance.
  • AC power indicator and alarm indicator light.
  • Low battery warning "chirp" and missing battery tab.
  • 9-volt battery backup for peace of mind through power outages.
All BRK Electronics carbon monoxide alarms are listed to UL Security Regular 2034 for residential carbon monoxide alarms. Consists of 9-volt backup battery. 5-year limited warranty.--Bree Norlander
What is in the Box A single combination smoke and CO alarm, a single 9-volt battery, and user's manual
First Alert SC9120B Hardwire Combination Smoke/Carbon Monoxide Alarm with Battery Backup

GE 56789 SmartHome Wireless Window Alarm

GE 56789 SmartHome Wireless Window Alarm
Price : $5.19
You Save : $4.76 (48%)

Product Description


From the Manufacturer
Alarm sounds when window is opened
No wiring important - Hassle-free to install - 120dB alarm - Concealed ON/OFF switch for protection - Demands 4 LR44 batteries (Included)
GE 56789 SmartHome Wireless Window Alarm

Clover Electronics HDC500 Super High-Resolution Indoor/Outdoor ET Security

Clover Electronics HDC500 Super High-Resolution Indoor/Outdoor ET Security Camera with 180 degree Coverage - Small (Dark Grey)
Price : $298.00
List Price : $559.00
You Save : $261.00 (47%)

Item Description


Panoramic Color
Clover Electronics HDC500 Super High-Resolution Indoor/Outdoor ET Security Camera with 180 degree Coverage - Small (Dark Grey)

Skylink WT-433W Door/Window Sensor

Skylink WT-433W Door/Window Sensor
Price : $17.86
You Save : $7.33 (29%)

Item Description


From the Manufacturer
Door/Window Sensor
Skylink door/window sensor protects doors and windows. Designed to perform with Skylink Security systems notifies control panel of deluxe program (Item 164287) or emergency dialer (Item 17615, if installed) for normal system (Item 164286) when get in touch with is broken. Advised Use: Add on sensor, Senses: Motion / security, Range (ft.): 100, Detections Motion (ft.): Yes, Dials: Dialer sold separately, Power Provide: Battery, Battery Sort: 12V, Battery Included: Yes, Compatible With: Skylink manage panel, Dimensions L x W x H (in.): eight 1/8 x 6 1/4 x 1 three/4, Single, Pair, or Technique: Single
Skylink WT-433W Door/Window Sensor

Kidde 0919-9999/ RF-SM-DC Battery-Operated Wireless Interconnectable Smoke

Kidde 0919-9999/ RF-SM-DC Battery-Operated Wireless Interconnectable Smoke Alarm
Price : $29.97
You Save : $33.02 (52%)

Item Description


Amazon.com Item Description
The Kidde 0919-9999 Battery-Operated Wireless Smoke Alarm allows for the uncomplicated installation of an interconnected smoke alarm program with no the high cost and hassle of rewiring your residence. The alarms are wirelessly linked so that when one particular alarm is triggered, all alarms will sound. This alarm can also be placed in a detached workshop or shed and linked into the home's interconnected technique.
Specialists advise interconnected alarms, for the reason that when 1 sounds, they all sound, providing an early warning against fire by significantly escalating your capacity to hear an alarm anywhere in your residence, regardless of exactly where the fire starts. Newer houses are required by code to have interconnected alarms. Wireless engineering now enables any residence to have an interconnected method.
This alarm utilizes ionization sensing technologies. Ionization sensing alarms might possibly detect invisible fire particles (connected with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may perhaps detect visible particles (related with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to assist insure maximum detection of the numerous forms of fire that can occur inside the house.
Select the Perfect Wireless Alarms for Your HomeKidde gives two wireless item alternatives: a Battery Powered Smoke Alarm, and an AC Powered Smoke Alarm. These goods enable you to customize your technique based on your distinct requirements. Read beneath to see which Kidde wireless smoke alarms are finest for your home.

Why Wireless?
  • When one particular alarm sounds they all do
  • Capacity to interconnect without wires
  • Install in minutes, anywhere in the dwelling
  • Much less price, and less hassle than re-wiring

An interconnected method delivers more warnings in much more areas in case of smoke or fire in your residence.
The Kidde Wireless System alarms have a hush button to silence nuisance alarms. .Getting Started with Wireless Interconnect in 3 Simple Actions
Step 1 - Figure out the type of smoke alarms at the moment installed in your property.
1. Battery PoweredNo wires runs only on batteries.Most older houses have battery-powered smoke alarms. These alarms have no protruding wires and are battery powered.
two. HardwiredRuns on your home's electrical energy and might have battery backup. Only one particular alarm sounds when test button is pressed.If your dwelling was built in the last 20 years, you quite possibly have hardwired smoke alarms. If only the alarm that you test sounds, then you do not have an interconnected system.
3. InterconnectedRuns on your home's electrical energy and can have battery backup. All alarms sound when one test button is pressed.Homes built in the final 15 years may perhaps have an interconnected smoke alarm system. If all alarms sound when you test, you have an interconnected system.
Step two - Make a decision how lots of alarms you have to have in your property.
The NFPA recommends at least a single smoke alarm on every level of the property and in every single sleeping location.
Step three - Based on your home's present alarm set-up, make a decision which Kidde Wireless alarms to buy.
1. If your household has only battery powered alarms: Buy sufficient Kidde Wireless Battery Powered Smoke Alarms (0919-9999) to replace all of your current smoke alarms. You will also have the ability to add Kidde Wireless Battery Powered Alarms in additional rooms for expanded coverage.
2. If your property has only hardwired smoke alarms: Acquire enough Kidde Wireless AC Powered Smoke Alarms (1279-9999) to replace all of your existing smoke alarms. You will also have the capability to add Kidde Wireless Battery Powered Alarms in extra rooms for expanded coverage.
3. If your dwelling has interconnected smoke alarms: Purchase one particular Kidde Wireless AC Powered Smoke Alarms to replace one particular existing smoke alarm. Kidde Wireless Battery Powered Alarms can then be installed in additional rooms.
Interconnectable for Enhanced SafetyFire and consumer authorities suggest interconnected alarms for added protection. According to the National Fire Protection Association (NFPA), most Americans really feel they are much more at threat of being a victim of a tornado than of a house fire. Really the opposite is accurate. Fires are additional well-known than any other disaster that strikes a family members at residence, and can become deadly in minutes.
You have on common less than 3 minutes from the time you hear a smoke alarm to escape a fire. The sooner you hear an alarm, the sooner you can get out safely. Smoke alarms that link together so that when 1 goes off, they all go off, are named interconnected alarms. These alarms present a lot more warnings in much more locations, giving your household much more time to escape a house fire. Homes built immediately after 1993 are necessary by building codes to have interconnected alarms that are wired into their electrical program.
Trademarked Hush Function for ConvenienceBy pressing the Hush button, you can readily and safely silence nuisance alarms triggered by non-emergency conditions, such as overcooked dinners.
This alarm's Sensible Hush function has the capability of temporarily desensitizing the alarm circuit for up to 8 minutes. This feature is to be employed only when a known alarm condition, such as smoke from cooking, activates the alarm. The smoke alarm is desensitized by pushing the Test/Hush button on the smoke alarm cover. If the smoke is not too dense, the alarm will silence quickly. The red LED will illuminate for 1.5 seconds just about every 8 seconds whilst in hush. This indicates that the alarm is in a temporarily desensitized condition. The smoke alarm will automatically reset immediately after approximately 8 minutes and sound the alarm if particles of combustion are nevertheless present. Intelligent Hush can be utilized repeatedly till the air has been cleared of the situation causing the alarm. Pushing the Test/Hush button on the alarm will finish the hush period.
3-AA Batteries, Indicator LED, and Test FeatureBecause a smoke alarm only assists shield you if it is operating, this unit functions a red LED that flashes each 10 seconds to indicate that it is operating appropriately. For extra peace of mind, the alarm also contains a test/reset button that enables you to periodically test its circuitry and horn.
The alarm's 3-AA batteries give continuous protection against smoke and fire hazards, even through power outages. The unit delivers a low battery warning that troubles a brief chirp just about every 30 to 40 seconds for at least seven days ahead of losing power, letting you know that it really is time to alter the battery.
This alarm is UL listed, so you can be confident of its excellent, and it is backed by a 10-year restricted warranty that lasts the life of the alarm.
About Kidde: A UTC Fire Safety Brand Renowned for global leadership in fire detection and suppression, Kidde delivers options ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems.
Kidde is a UTC Fire Safety brand, with a history that's wealthy with innovations, from the patent of the Chubb Detector Lock in 1818 to the improvement of the world's first wireless networked smoke detectors in 2004.
What is in the BoxOne 0919-9999 smoke alarm with mounting bracket and mounting hardware, three- AA batteries, a ten-year restricted warranty and a bilingual user's manual.

From the Manufacturer
There are only minutes to escape a property fire. The sooner you hear the smoke alarm, the sooner you can get out safely. Kidde interconnected Ionization smoke alarms offer early warning against fire by linking together the smoke alarms in your household, dramatically rising your potential to hear an alarm anywhere, regardless of where the fire starts. The Kidde Wireless Smoke Alarm enables families to rapidly install an interconnected smoke alarm program throughout their dwelling without the mess of rewiring or cost of labor. Interconnected smoke alarms deliver an earlier warning to fire mainly because they link together so that when a single alarm sounds, they all sound. This provides even more warning in far more locations, and provides families significantly more time to escape. This battery-powered alarm links with other alarms and components of the Kidde Wireless Technique to generate a customized, advanced fire protection system. It even can be placed in a detached workshop or shed and linked into the home's technique. Install UL listed smoke alarms on just about every floor of your property, in hallways, inside bedrooms and outside of sleeping regions. Replace smoke alarms every single 10 years. Ionization sensing alarms may detect invisible fire particles, related with quickly flaming fires sooner than Photoelectric alarms. Research show each sorts will proficiently detect either kind of fire. For optimal protection, install both smoke alarm technologies in your residence.
Kidde 0919-9999/ RF-SM-DC Battery-Operated Wireless Interconnectable Smoke Alarm

AAS-V100 Wireless Home Security Alarm System Kit DIY (R)

AAS-V100 Wireless Home Security Alarm System Kit DIY (R)
Price : $199.99
You Save : $160.00 (46%)

Item Description


The AAS Security Program provides you and your family the piece of mind that only the most advanced wireless alarm program can produce. The AAS Safety System is the most budget friendly, technologically advanced, sophisticated, but quick to use and install wireless house or office security systems obtainable right now. The wire-free of charge AAS will monitor your property continually whether or not you are residence or away. A full-featured wireless security method that combines the most trendy safety capabilities in a handy and economical package. This method presents all the bells whistles you desire to successfully protect your household from burglars.
AAS-V100 Wireless Home Security Alarm System Kit DIY (R)